Pengaruh Anoda Magnesium Alloy AZ91D Terhadap Pola Korosi Galvanis Pada Logam Yang Tecelup Air Laut

Mohammad Ridwan(1*), Sulaiman Sulaiman(2), Sunarso Sugeng(3)

(1) Universitas Diponegoro
(2) Universitas Diponegoro
(3) Universitas Diponegoro
(*) Corresponding Author

Abstract


Air laut atau garam merupakan elektrolit yang sangat agresif dan korosif bila terkena logam, yang menjelaskan bahwa korosi pada struktur laut / lepas pantai pada berbagai jenis logam dan paduan baja, berbicara sangat berbahaya, tidak hanya untuk struktur terendam, tetapi juga karena keadaan presentasi. Tujuan dari makalah ini adalah untuk menganalisis pengaruh anoda magnesium alloy AZ91D terhadap pola korosi galvanis pada logam yang terpapar air laut.Penelitian ini tentang penerapan struktur pengorbanan magnesium dan dapat diterapkan pada struktur bawah air yang terpapar air laut yang diperoleh dari penelitian sebelumnya. . Dalam hal ini kinerja kedua paduan akan dinilai dengan meliputi potensi proteksi dan arus galvanik yang dapat dihasilkan, kapasitas, efisiensi, tingkat konsumsi, waktu induksi, dan jalur korosi. Dengan demikian dapat dikatakan bahwa faktor dan desain lingkungan, seperti konsentrasi garam terlarut dan variasi luas yang didukung, juga telah diuji pengaruhnya terhadap kemampuan bahan paduan. Hasil penelitian ini menunjukkan bahwa material magnesium alloy AZ91D dapat diaplikasikan pada logam yang terpapar air laut seperti kapal dan struktur bawah laut, karena ketahanannya yang lebih tinggi terhadap korosi galvanik. Magnesium AZ91D juga memiliki ketahanan terhadap banyak waktu di laut. Sehingga upaya peningkatan ketahanan magnesium terhadap logam yang berhubungan dengan air laut seperti kapal dan struktur bawah laut, spesimen AZ91D akan lebih baik dengan logam aluminium untuk meningkatkan ketahanan korosi dan lebih sulit daripada tidak terikat

Keywords


Magnesium AZ91D, korosi galvanik, kapal, struktur bawah air

Article metrics

Abstract views : 162 | views : 20

Full Text:

PDF

References


I. Gurrappa and I. V. S. Yashwanth, “Chapter 2 - The Importance of Corrosion and the Necessity of Applying Intelligent Coatings for Its Control,” A. Tiwari, J. Rawlins, and L. H. B. T.-I. C. for C. C. Hihara, Eds. Boston: Butterworth-Heinemann, 2015.

S. F. Khristyson, I. P. Mulyatno, and A. Trimulyono, “Analisa Kekuatan Konstruksi Internal Ramp Sistem Steel Wire Rope Pada KM. DHARMA KENCANA VIII Dengan Metode Elemen Hingga,” J. Tek. Perkapalan, vol. 2, no. 3, 2014.

Z. Ariany, A. Hendra, and S. Febriary, “Standart Pelayanan Minimal (SPM) DAN Sistem Lasing Pada Kapal Ro-Ro Untuk Keselamatan Transportasi Penyebrangan Laut (Studi Kasus KMP. LEGUNDI),” GEMA Teknol., vol. 20, no. 1, p. 26, Nov. 2018.

D. Battocchi, G. Bierwagen, A. Stamness, D. Tallman, and A. Simões, “5 - Magnesium-rich primers for chromate-free protective systems on Al 2024 and Al 7075,” in European Federation of Corrosion (EFC) Series, L. Fedrizzi, H. Terryn, and L. B. T.-I. P.-T. T. to P. C. of M. S. Simões, Eds. Woodhead Publishing, 2007.

D. Orlov, K. D. Ralston, N. Birbilis, and Y. Estrin, “Enhanced corrosion resistance of Mg alloy ZK60 after processing by integrated extrusion and equal channel angular pressing,” Acta Mater., vol. 59, no. 15, pp. 6176–6186, Sep. 2011.

R. Zeng, K. U. Kainer, C. Blawert, and W. Dietzel, “Corrosion of an extruded magnesium alloy ZK60 component—The role of microstructural features,” J. Alloys Compd., vol. 509, no. 13, pp. 4462–4469, Mar. 2011.

H. R. B. Rad, M. H. Idris, M. R. A. Kadir, and S. Farahany, “Microstructure analysis and corrosion behavior of biodegradable Mg–Ca implant alloys,” Mater. Des., vol. 33, pp. 88–97, Jan. 2012.

H. R. Bakhsheshi-Rad, M. R. Abdul-Kadir, M. H. Idris, and S. Farahany, “Relationship between the corrosion behavior and the thermal characteristics and microstructure of Mg–0.5Ca–xZn alloys,” Corros. Sci., vol. 64, pp. 184–197, Nov. 2012.

Y. Song, E.-H. Han, D. Shan, C. D. Yim, and B. S. You, “The effect of Zn concentration on the corrosion behavior of Mg–xZn alloys,” Corros. Sci., vol. 65, pp. 322–330, Dec. 2012.

H. Bohnes and G. Franke, “6 - Galvanic (Sacrificial) Anodes,” W. von Baeckmann, H. Bohnes, G. Franke, D. Funk, C. Gey, H. Gräfen, G. Heim, V. Heinzelmann, K. Horras, B. Isecke, H. Kampermann, B. Leutner, H.-U. Paul, F. Paulekat, W. Prinz, B. Richter, G. Rieger, H. G. Schöneich, and W. B. T.-H. of C. C. P. (Third E. Schwenk, Eds. Burlington: Gulf Professional Publishing, 1997, pp. 179–206.

K. A. Chandler, “1 - Introduction: The control of corrosion in marine environments,” in Marine Engineering Series, K. A. B. T.-M. and O. C. Chandler, Ed. Butterworth-Heinemann, 1985.

G.-L. Song and Z. Xu, “Effect of microstructure evolution on corrosion of different crystal surfaces of AZ31 Mg alloy in a chloride containing solution,” Corros. Sci., vol. 54, pp. 97–105, Jan. 2012.

R. Ambat, N. N. Aung, and W. Zhou, “Evaluation of microstructural effects on corrosion behaviour of AZ91D magnesium alloy,” Corros. Sci., vol. 42, no. 8, pp. 1433–1455, Aug. 2000.




DOI: https://doi.org/10.35314/ip.v11i2.1966

Refbacks

  • There are currently no refbacks.


Copyright (c) 2021 INOVTEK POLBENG


This Journal has been listed and indexed in :

         

Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/IP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License