PERENCANAAN GEOMETRIK JALAN BERBASIS BIM PADA JALAN PELABUHAN BANDAR SETIA RAJA - BERANCAH

Fikri Nugraha Ihsan(1*)

(1) Politeknik Negeri Bengkalis
(*) Corresponding Author

Abstract


In line with the times, the world of construction is faced with various challenges, one of which is the demand for visualization both in project design and during post-implementation. Using digital data, BIM can identify project risks as well as actual physical conditions optimally. In addition, the implementation of BIM makes the design and construction process leaner and more transparent, improves accuracy in calculations, avoids mistakes during planning to implementation, and shortens execution time. In other words, BIM improves efficiency and accuracy through coordination between construction stakeholders. By utilizing BIM in the planning of Bandar Setia Raja-Berancah Port Road, Bengkalis District, Bengkalis Regency, Riau, BIM-based road geometric planning was carried out. The application of BIM is carried out in several stages, namely data collection, creating a geometric planning concept in Autodesk Infraworks, and then exporting it to Autocad Civil 3D to make detailed planning and calculation drawings. The conclusion obtained from this study is that BIM technology makes it very easy to make road geometric planning using Autodesk Infraworks and Autocad Civil 3D software, as well as to overcome the demands of project visualization.


Keywords


Building Information Modeling, Road Geometric Planning, Autodesk Infraworks, Autocad Civil 3D.

Article metrics

Abstract views : 51 | views : 4

Full Text:

PDF

References


Syahputra, “Aplikasi Building Information Modelling (BIM) Pada Perencanaan Dan Pemodelan Jalan,” 2021.

P. Studi, S. Teknik, and P. Jalan, “SKRIPSI PERENCANAAN GEOMETRIK JALAN BERBASIS BIM (Studi Kasus : Jalan Poros Sungai Alam – Selat Baru Sta 01+500- 02+000, Kecamatan Bengkalis, Kabupaten Bengkalis, Riau),” 2022.

D. Teguh, “Perbandingan Perencanaan Geometrik Jalan Menggunakan Aplikasi AutoCAD Civil 3D Dengan Metode Bina Marga,” J. Univ. Pakuan, pp. 1–12, 2019, [Online]. Available: http://eprints.unpak.ac.id/id/eprint/2520

A. S. Ariyanto, “2592-110022-1-Sm,” PEMANFATAN PERANGKAT LUNAK AUTOCAD Civ. 3D V. 2019 SEBAGAI ALAT BANTU Perenc. JALAN Arief, vol. 07, 2021.

K. P. U. dan P. Rakyat, “Pedoman Desain Geometrik Jalan 2020,” Direktorat Jenderal Bina Marga, 2020.

R. M. Thaher, W. Murad, and H. M, “Penggunaan Aplikasi Civil 3d dalam Merencanakan Geometrik Jalan Raya,” J. Talent. Sipil, vol. 4, no. 2, p. 145, 2021, doi: 10.33087/talentasipil.v4i2.64.

E. E. Putri and M. Iqbal, “Perencanaan Ulang Geometrik Dan Perkerasan Jalan Pada Ruas Jalan Batas Kota Padang – Kota Painan Km 70+000 - Km 72+700,” Rang Tek. J., vol. 5, no. 1, pp. 83–93, 2022, doi: 10.31869/rtj.v5i1.2813.

E. E. Putri, M. L. Syaftria Nanda, and M. Aminsyah, “Perencanaan Geometrik Jalan Menggunakan Autocad Civil 3D Studi Kasus Jalan Duku – Sicincin (Sta 0+000 – Sta 2+700) Provinsi Sumatera Barat,” J. Rekayasa Sipil, vol. 17, no. 2, p. 140, 2021, doi: 10.25077/jrs.17.2.140-152.2021.




DOI: https://doi.org/10.35314/tekla.v5i2.3463

Copyright (c) 2024 Fikri Nugraha Ihsan

This Journal has been listed and indexed in :

 
View My Stats Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/tekla is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License .