Analisa Pengaruh Heat Treatment Nilai Uji Kekerasan Mata Bajak Pada Mesin Pembajak Sawah Roda Satu

Dedi Yanto, Erwen Martianis

Abstract


This reseach was conducted to determine the effect of variations in oil and brine media and temperature variations on the Rockwell hardness of KS steel plate (low karbon) 6 mm in the heat treatment process.the heat treatment process is widely used to increase hardness and add carbon elements to steel that has a low hardness value and needs to be given special treatment to increase the hardness of the steel. In this study the oil and salt water media.in this study the heat treatment process was carried out with variations in temperature, namely 7500C, 8000C after reaching the desired temperature and then held for 10 minutes. Meanwhile, for the Rockwell hardness test, the highest hardness value at 8000C was found in the brine media with a hardness value of 64,3HRC


Full Text:

21-26

References


Setiawan Hera (2012) Pengaruh Proses Heat Treatment Pada Kekerasan Material Spesial K (K100) jurnal teknik mesin, fakultas teknik, universitas kudus.

Amanto, H., dan Daryanto, (1999), Ilmu Bahan, penerbit Bumi Aksara, Jakarta

Smallman, R.E., (1991), Metalurgi Fisik Modern, Edisi ke empat, Penerbit Gramedia,Jakarta.

Suryanto joko,(2020) “analisis kinerja pembajakan pada variasi pembajakan hand Traktor†Program Studi Teknik Pertanian Sekolah Tinggi Pertanian Kutai Timur Sangatta

Adriani, W., Prawistira, D.E., dan Ramadan, A.K. 2016. Berat Jenis Dan Berat

Volume. Universitas Muhammadiyah Program Studi Agroteknologi

Fakultas Pertanian Dan Peternakan: Malang.

Sudaryono.(2001). Pengaruh Pemberian Bahan Pengkondisi Tanah Terhadap Sifat Fisik Dan Kimia Tanah Pada Lahan Marginal Berpasir. Penelitian Pada Kelompok Teknologi Konsevasi Dan Pemulihan Lingkungan P3TLBPPT.

Bukhori (2014)529311d1188cb sektor_ pertanian_terhadap_pembangunan di indonesia.pdf

Mangala(2014) Studi Kinerja Lapang Berbagai Traktor Tangan Pada Budidaya Kacang Tanah (Arachis Hypogeae L). Jurnal Ilmiah Rekayasa Pertanian Dan Biosistem, 2(2),64-72.

Pahlevi, H. 2003. Perubahan Tahanan Tarik (Draft) Pembajakan Pada Perubahan Kadar Air Tanah dan Kecepatan Olah

Hadiutomo K. 2012. Mekanisasi Pertanian. IPB Press. Bogor.

Syarief A,(2006) Uji Kekerasan Baja Kontruksi ST-42 Pada Proses Heat Treatment info teknik vol 7 (48-55)

Akay, S.K., Yazika, M., Avinic, A., 2008. The Effect Of Heat Treatment On Phisical Properties Of Low Carbon Steel, Proceeding Of Romanian Academy Series A, Vol 10.

Djaprie, S., 1983, Ilmu Dan Teknologi Bahan, Erlangga, Jakarta.

George Krauss, “Heat Treatment and Processing Principleâ€, Material Park, Ohio 44073. Herman W.pollack, “Materials Sciece and Metalurgiâ€, Third Edition, Reston Publishing Company, Inc.

K-E Thelning, “Steel and Its Heat Treatment, Bofors Handbook, 1974. Marder, A,R,â€The Effect of Heat Treatment on The Propertiesâ€, Metal Trans, Vol 12A, Sep. 1981.

http://pusat-lingkaran.blogspot.com/2017/07/pengujian-kekerasan-bahan dengan- metode.html (13 januari 2020 jam 10.01)

Julianto eko,dkk (2019)â€analisa kekerasan mata pisau bahan st 60 pada mesin pemotong zincalume dengan proses perlakuan panas (heat treatment†Jurusan Teknik Mesin Fakultas Teknik, Universitas Muhammadiyah Pontianak

Sumiyanto, Abdunnaser (2017)â€pengaruh media pendingin terhadap sifat mekanik dan struktur mikro plat baja karbon ASTM A-36â€Fakultas Teknologi Industri, Institute Sains Dan Teknologi Nasional

Fadli Aulia Nanda,Dkk (2022)â€Pengaruh Variasi Temperature Tempering Terhadap Kekerasan Baja JIS Sup 9A Pada Mata Pisau†Jurnal Teknologi Vol.22, No.1

P Jamaludin,Dkk (2019)â€Alat Dan Mesin Pertanian†Universitas Negeri Makassar

Daywin Fj, Sitompul Rg, Hidayat I. (2008). “Mesin-Mesin Budidaya Pertanian Lahan Keringâ€. Graha Ilmu. Yogyakarta.

Taka.(2019).ChiselPlowTAKA142.https://taka.co.ir/en/index.php/products/ploughs/chisel-plowtaka-142[13 April 2019].

IskandarZ.2017.Alat_danMesin_Pengolah_Tanah(SeriMekanisasi_Pertanian).https://www.researchgate.net/publication/321252867[2 April 2019].

Anonim2.7.(2019).BrillionIronWorks.https://www.proxibid.com/asp/LotImageViewer.asp?ahid=527&aid=143008&lid=42238567&url=3236 1.jpg[10Maret2019].

Pratomo, Moedjiasto., Dan Irwanto,A. Kohar. 1983. Alat Tanam Mesin Pertanian 3. Direktorat Pendidikan Menengah Kejuruan : Jakaprta.




DOI: https://doi.org/10.35314/ism.v3i2.3049

DOI (21-26): https://doi.org/10.35314/ism.v3i2.3049.g1718

Refbacks

  • There are currently no refbacks.