Rancang Bangun Mesin Pengupas Kulit Buah Nanas Menggunakan Penggerak Motor Listrik

Habibur Rahman

Abstract


        In general, the process of peeling pineapple skin in the community still uses traditional methods, where the traditional method has several drawbacks, namely a small work capacity where to peel one pineapple takes ± 1-2 minutes. Stripping in this traditional way still has many shortcomings and weaknesses, including requiring a large amount of energy, requiring people who have special skills, risk of being hit by a knife, taking a long time, and the stripping position is not ideal. Design and manufacture a pineapple peeling machine with variations for peeling pineapples of various sizes. To find out how efficient the pineapple peeling machine is. This research was carried out based on four stages, the first was field observation, the second was design and design, the third was machine assembly, and the last was testing. This pineapple peeling machine is driven by a 0.5 hp electric motor with 1380 rpm and with a fruit chuck and stainless steel blade so that the material does not rust. This machine is designed to simplify and speed up the pineapple peeling process with a capacity of 96 pieces/hour . The stripping shaft rotation is 138 rpm and the engine speed is 1380. The efficiency of the pineapple peeling machine with a hollow galvanized iron frame material measuring 3 x 3 cm is able to support the machine and components of the pineapple peeling machine so as not to affect the results of the pineapple peeling.


Full Text:

Hal 39-44

References


KRISWOYO, K. (2020). Rancang Bangun Mesin Pengupas Kulit Nanas Double Sistem Pneumatik (Doctoral dissertation, Universitas Pancasakti Tegal).

Dewaner, R. P. (2014 Rancang Bangun Unit Pengupas Kulit dan Bonggol Buah Nanas Pada Mesin Pengupas Nanas TEP-01 (Doctoral dissertation).

Farid, A. (2021). Rancang Bangun Alat Pengupas Kulit Nanas (SKP. TM 0009) (Doctoral dissertation, Universitas Muhammadiyah Tasik malaya).

Dzulqornaini, A. (2015).Rancang Bangun Mesin Pengupas Kulit Nanas Semi Otomatis.Jurnal Rekayasa Mesin, 2 (03).

Susanto, J. (2018). Perancangan Mesin Pengupas Nanas Kapasitas 180 Kg/Jam (Doctoral dissertaion,University of Muhammadiyah Malang).

Putri, E., Maulana, D. I., & Hasan, A.(2021).Pengembangan Alat Pengupas Kulit Nanas (Ananas comosus) Semi Mekanis.Jurnal Keteknikan Pertanian Tropis dan Biosistem,9(2), 183-193.

SARAGIH, R. M. M. (2022). Rancang Bangun Mesin Pengayak Pasir.

Kom, K. S., & Trisetiyanto, A. N. (2021). Rancang Bangun Alat Penyemprot Disenfektan Otomatis dengan Sensor Passive Infra Red (PIR). Journal of System, Information Technology and Electronics Engineering (J-SITEE), 1(1), 40-48.

Rumimper, R., Sompie, S. R., & Mamahit, D. J. (2016). Rancang Bangun Alat Pengontrol Lampu Dengan Bluetooth Berbasis Android. Jurnal Teknik Elektro dan Komputer, 5(3), 24-33.

Lingga, N. E. P., Munir, A. P., & Ichwan, N. (2014). Rancang Bangun Alat Pengupas Kulit Nanas Sistem Press Manual. Jurnal Rekayasa pangan dan Pertanian, 2(4), 110-116.

Nusantari, S., Munir, A. P., & Harahap, L. A. MODIFIKASI MATA PISAU CINCIN PADA MESIN PENGUPAS KULIT NANAS.

Dharma, S., Silitonga, A. S., & Sebayang, A. H. (2019). PENINGKATAN PRODUKSI PENGOLAHAN NENAS DI DESA BUNTU BEDIMAR KECAMATAN TANJUNG MORAWA KABUPATEN DELI SERDANG. In Prosiding (SENIAS) Seminar Pengabdian Masyarakat.

Taufiqurrahman, M., Purwoko, B., & Meilasari, F. (2018). Pemberdayaan Masyarakat Kelompok Petani Desa Jungkat Kecamatan Siantan Kabupaten Pontianak dan Desa Rasau Jaya Umum Kecamatan Rasau Jaya Kabupaten Kubu Raya. Al-khidmah, 1(1), 44-52.

Nurul Absor, N., Merlinda, M., & Heikal Fatha, H. (2021). RANCANG BANGUN ALAT PENGUPAS KULIT BUAH NANAS (Doctoral dissertation, Politeknik Manufaktur Negeri Bangka Belitung).

Siska, M. (2013). Rancang Ulang Alat Pengupas Nanas yang Ergonomis (Studi Kasus: UD Berkat Bersama). In Prosiding Industrial Engineering Conference on Telecommunication (INDECT).

Andhyka, P. (2021). ANALISA KEKUATAN SAMBUNGAN LAS PADA KONSTRUKSI MOBIL AIR ENGINE. ALMIKANIKA, 2(1), 15-21.




DOI: https://doi.org/10.35314/ism.v3i1.2917

DOI (Hal 39-44): https://doi.org/10.35314/ism.v3i1.2917.g1355

Refbacks

  • There are currently no refbacks.