M. Syafiuddin(1*)

(1) politeknik elektronika negeri surabaya
(*) Corresponding Author


The Government policy about energy management based on regulations of the Minister of Energy and Mineral Resources number 13 and 14 on 2012 concern saving of electricity use and energy management as a form of utilizing energy resources effectively, efficiently, and rationally, without reducing building functions should be an energy audit. So LED Driver is made in this prototype to utilize energy from photovoltaic without batteries for building lighting in the daytime, so besides saving in terms of load (LED) it is also saving energy sources. This paper will discuss LED drivers using photovoltaic (PV). The use of hybrid battery-less led drivers in this paper to increase the rate of savings electricity usage in buildings. Led drivers have the hybrid designed that can replace the PV power supply to the PLN power supply when the power generated by PV is less than nominal power. The output voltage of the LED is controlled by STM32F1 microcontroller using a boost converter. Experimental results in the field voltage generated by the LED driver is 195 Vdc. The power produced by the LED driver is 100 watts using 4 LED. And the value of the efficiency of the Boost converter reaches 92%.


driver, hybrid, LED lamp, boost converter, building

Article metrics

Abstract views : 57 | views : 18

Full Text:



Juwito A F, Pramonohadi S, Haryono T, “Optimalisasi Energi Terbarukan pada Pembangkit Tenaga Listrik dalam Menghadapi Desa Mandiri Energi di Margajaya”, Jurnal Ilmiah Semesta Teknika, Vol. 15, No. 1 , Mei 2012.

(2017) Outlook Energi Indonesia 2016. [Online].Available:https://www.esdm.go.id/

(2017) Statistik Ketenagalistrikan 2015. [Online]. Available: www.djk.esdm.go.id/

Ramjee Prasad Gupta, Dibya Bharti, Upendra Prasad. 2011. Design and analysis of Buck Boost Converter Based LED Driver For Enhancing the Stability. Jharkhand India : Journal of Electrical Engineering

Arjyadhara Pradhan, Bhagabat Panda. 2018. A Simplified Design and Modeling of Boost Converter for Photovoltaic Sytem. India : International Journal of Electrical and Computer Engineering (IJECE) Vol. 8.

S Masri, P W Chan. 2011. Design and development of a DC-DC boost converter with constant output voltage. Pulau Pinang, Malaysia :IEEE International Conference on Intelligent and Advanced Systems.

Aman Jha, Manoj Kumar, dkk. 2017. Smart Solar Hybrid LED Streetlight. India :IEEE Recent Development in Control, Automation, and Power Engineering (RDCAPE).

Hart Daniel W. Power Electronic. Valparaiso Indiana : McGraw-Hill. 2011.

(2017) Spesifikasi mikrokontroller STM32F1. [Online].Available: https://satoshinm.github.io/

DOI: https://doi.org/10.35314/ip.v9i1.971


  • There are currently no refbacks.

Copyright (c) 2019 INOVTEK POLBENG

This Journal has been listed and indexed in :


Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/IP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License