PENGARUH PENDINGINAN MEDIA AIR DAN OLI PADA HEATTREATMENT SAMBUNGAN LAS METODE SMAW TERHADAP KEKUATAN LOGAM YANG DIHASILKAN

Asep AR Ruchiyat(1*)

(1) Politeknik Negeri Ketapang Kabupaten Ketapang Kalimantan Barat
(*) Corresponding Author

Abstract


Abstract

 

Welding is a method of metal extension that utilize the Penetration of heat produced. Heat and the freeze of a metal extension is a natural phenomenon, where that process works based on the difference of temperature. The cooling temperature that work so fast creating diverse structure as the result that the mechanical ability of a metal changes.

                This research purpose is to find out to what extent heat treatment with water and oil cooling media gives effect to the result of SMAW weld, considering processes changes in metal are very sensitive towards mechanical ability.

 

                Hardness testing in raw material that has been done gives result of 46.9 with an average hardness in the normal welding process of 48 HRB or increased by 2.34%. This value indicates that the welding process will have an impact on the increase in hardness of the weld metal. Then the weld metal heat treatment process at 850oCwith normal cooling of free air decreases the weld metal hardness by 43.5 HRB or 7.24% under raw material. While the quenching process carried out with water and oil cooler has an impact on increasing the hardness above heat treatment, normal cooling is 4.36% and 3.19% lower to the raw material. From this description it can be concluded that quench accelerates the rate of cooling and increase hardness by 4.36%.

 

Key words: welding SMAW, heattreatment, cooling water and oil, hardness metal   


Keywords


welding SMAW, heattreatment, cooling water and oil, hardness metal

Article metrics

Abstract views : 58 | views : 12

Full Text:

PDF

References


DAFTAR PUSTAKA

Alip, M. 1989. Teori dan Praktik Las. Departemen Pendidikan Kebudayaan.

Ambiyar, dkk. 2008. Teknik Pembentukan Plat Jilid 1. DirektoratPembinaan Sekolah Menengah Kejuruan, Direktorat Jenderal Manajemen Pendidikan Dasar dan Menengah, Departemen Pendidikan Nasional. Jakarta.

Armentani, E; Esposito, R; Sepe, R. 2007. The effect of thermal properties and weld efficiency on residual stresses in welding. Journal of Achievements in Materials and Manufacturing Engineering. 319. Dikunjungi 14 Oktober 2009.

Amanto, Hari dan Daryanto. 2003. Ilmu Bahan. Jakarta: PT Bumi Aksara.

Budiarsa, I.N. 2008. Pengaruh besar arus pengelasan dan kecepatan volume alir gas pada proses las GMAW terhadap ketangguhan aluminium 5083. Jurnal Ilmiah Teknik Mesin CAKRAM vol.2 No.2. 112 – 116. Dikunjungi 7 November 2009.

Daryus, A. 2008. Diktat Kuliah Proses Produksi. http://ft.unsada.ac.id/wp-content/uploads/2008/10/bab1-pp1.pdf.

Holman, J.P. 1994. Perpindahan Kalor. Erlangga.Jakarta.

Kou, S. 1987. Welding Metallurgy. New York:John Wiley & Sons Inc.

Messler, R.W, Jr. 1999. Principles Of Welding. New York: John Wiley & Sons Inc.

Paradowska, A.M; Price, J.W.H; Ibrahim, R; Finlayson, T.R. 2006. The effect of heat input on residual stress distribution of steel welds measured by neutron diffraction. Journal of Achievements in Materials and Manufacturing Engineering. 385. Dikunjungi 14 Oktober 2009.

Picarima; Geraldoxtoviandrew. 2009. Pengaruh arus, kecepatan pengelasan dan jarak penyemprotan media pendingin terhadap pembentukan presipitasi karbida khrom pada SS 304 dengan pengelasan GTAW. Abstrak Pengelasan GTAW posted by aguss 10/12/2009.

Rubijanto, 2006. Pengaruh proses pendinginan paska perlakuan panas terhadap uji kekerasan (Vickers) dan uji pada baja tahan karat 304 produksi pengecoran logam di Klaten. Traksi. Vol.4.No.1

Suharno. 2008. Prinsip-prinsip Teknologi dan Metalurgi Pengelasan Logam. LPP UNS dan UNS press. Surakarta.

Surdia, T; Shinroku, S. 2005. Pengetahuan Bahan Teknik. Pradnya Paramita. Jakarta.

Surdia, T; Chijiwa, K. 2006. Teknik Pengecoran Logam. Pradnya Paramita. Jakarta.

Widharto, S. 2008. Petunjuk Kerja Las. Pradnya Paramita. Jakarta.

Widodo, A. 2009. Memahami Dasar-dasar Kejuruan. http://masdodod.files. wordpress.com/2009/03. diakses 8 September 2009.

Wiryosumarto, H; Okumura, T. 2008. Teknologi Pengelasan Logam. Pradnya Paramita. Jakarta.




DOI: https://doi.org/10.35314/ip.v8i2.732

Refbacks

  • There are currently no refbacks.


Copyright (c) 2018 INOVTEK POLBENG


This Journal has been listed and indexed in :

         

Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/IP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License