Characteristics of Silica Sand Shipyard Sandblasting Waste as Construction Materials

Kiki Dwi Wulandari, Widya Emilia Primaningtyas, Benedicta Dian Alfanda, Wahyuniarsih Sutrisno

Abstract


Silica sand as by-product waste is a major contributor to the volume of waste generated by sandblasting activities in the shipping industry. Based on a survey conducted during 2020-2022, silica sand in the shipping industry in East Java is around 450 tons/year. Silica sand has potential utilization based on its material characteristics, similar to natural sand in construction materials. This research analyzed the characteristics of silica sand from sandblasting waste to develop as construction material. The tests carried out included physical properties (particle size and shape, specific gravity, moisture content, absorption, mud content, specific gravity, and organic content) and chemical properties (X-Ray Fluorescence (XRF) and Scanning Electron Microscope-Energy Dispersive X-Ray tests (SEM-EDX)). The results show that silica sand from sandblasting waste has 548.93 ± 6.46 m average particle size, 2.730 t/m3 specific gravity angular grain with medium sphericity, 0.06% water content, 3.381% absorption capacity, 1.22% mud content, 0.09 kg/liter bulk density, and a clear solution on the organic content test. As chemical content of sandblasting waste, the amount of SiO2, Al2O3, Fe2O3, and CaO are 93.02%, 1.02%, 2%, and 0.63%, respectively. This research concluded that shipyard sandblasting waste has characteristics that can be used as fine aggregate for sustainable building construction materials.

Keywords


Silica Sand; Sandblasting; By-Product Waste; Fine Aggregate; Construction Material

Full Text:

PDF

References


Pemerintah Indonesia, Peraturan Pemerintah No. 101 Tahun 2014 tentang Pengelolaan Limbah Bahan Berbahaya dan Beracun, Peraturan Pemerintah, Jakarta, 2014.

G. K. Attri, R. C. Gupta, and S. Shrivastava, “Sustainable precast concrete blocks incorporating recycled concrete aggregate, stone crusher, and silica dust,†J Clean Prod, vol. 362, Aug. 2022.

S. Ramdani, A. Guettala, M. L. Benmalek, and J. B. Aguiar, “Physical and mechanical performance of concrete made with waste rubber aggregate, glass powder and silica sand powder,†Journal of Building Engineering, vol. 21, pp. 302–311, 2019.

H. Binici and O. Aksogan, “Durability of concrete made with natural granular granite, silica sand and powders of waste marble and basalt as fine aggregate,†Journal of Building Engineering, vol. 19, pp. 109–121, 2018.

S. G. M. and J. P., “Assessment of usage of manufactured sand and recycled aggregate as sustainable concrete: A review,†Mater Today Proc, vol. 64, pp. 1029–1034, 2022.

S. He, C. Jiao, Y. Niu, and S. Li, “Utilizing of coral/sea sand as aggregates in environment-friendly marine mortar: Physical properties, carbonation resistance and microstructure,†Case Studies in Construction Materials, vol. 16, p. e00981, 2022.

Sunita, “Effect of biomass Ash, foundry sand and recycled concrete aggregate over the strength aspects of the concrete,†Mater Today Proc, vol. 50, pp. 2044–2051, 2022.

A. Gholampour, J. Zheng, and T. Ozbakkaloglu, “Development of waste-based concretes containing foundry sand, recycled fine aggregate, ground granulated blast furnace slag and fly ash,†Constr Build Mater, vol. 267, p. 121004, 2021.

M. A. de Barros Martins, R. M. Barros, G. Silva, and I. F. S. dos Santos, “Study on waste foundry exhaust sand, WFES, as a partial substitute of fine aggregates in conventional concrete,†Sustain Cities Soc, vol. 45, pp. 187–196, 2019.

R. Dharmaraj, S. Maruthivenkatesh, K. Narayanan, M. Ramalingam, Y. Aarthi, and P. Rajalinggam, “Resilience and sturdiness of the foundry sand as a result of the partial substitution of cement and fine aggregate,†Mater Today Proc, 2022.

L.-Y. Xu, B.-T. Huang, J.-C. Lao, and J.-G. Dai, “Tailoring strain-hardening behavior of high-strength Engineered Cementitious Composites (ECC) using hybrid silica sand and artificial geopolymer aggregates,†Mater Des, vol. 220, p. 110876, 2022.

R. Malathy et al., “Use of Industrial Silica Sand as a Fine Aggregate in Concrete—An Explorative Study,†Buildings, vol. 12, no. 8, Aug. 2022.

S. K. Sharma and H. Gupta, “Development of Paver Block by Using Foundry Sand Based Geopolymer Concrete,†Journal of Today’s Ideas - Tomorrow’s Technologies, vol. 3, no. 2, pp. 129–144, Dec. 2015.

Y. E. Putra dan Sutikno, Pemanfaatan Limbah Sandblasting sebagai Bahan Campuran Paving Block. Jurnal Rekayasa Teknik Sipil. 01(01): 81-86, 2016.

P. R. de Matos, M. F. Marcon, R. A. Schankoski, and L. R. Prudêncio Jr., “Novel applications of waste foundry sand in conventional and dry-mix concretes,†J Environ Manage, vol. 244, pp. 294–303, 2019.

S. Kulkarni and V. Katti, “Article ID: IJCIET_08_09_058 Pavers,†International Journal of Civil Engineering and Technology (IJCIET), vol. 8, no. 9, pp. 498–505, 2017.

G. Yogha Luthfizar, F. Sri PujiP, and T. Akbari, “Pemanfaatan Limbah Pasir Silika sebagai Bahan Pengganti Pasir untuk Pembuatan Paving Block,†2019.

K. Jitendra and V. C. Khed, “Optimization of concrete blocks with high volume fly ash and foundry sand,†Mater Today Proc, vol. 27, pp. 1172–1179, 2020.

K. D. Wulandari and J. J. Ekaputri, “An Investigation of Damage Factors in Industrial Scale of Light-Weight Bricks Production,†in MATEC Web of Conferences, Dec. 2017, vol. 138.

J. C. Santamarina, “Soil behaviour: The role of particle shape,†2004.

P. Manurung and P. Karo-Karo, “Analisis dan Karakterisasi Kandungan Silika (SiO2 ) sebagai Hasil Ekstraksi Batu Apung (Pumice),†2017.




DOI: https://doi.org/10.35314/ip.v12i2.2865

Refbacks

  • There are currently no refbacks.


Copyright (c) 2022 INOVTEK POLBENG


This Journal has been listed and indexed in :

         

Creative Commons License
inovtek polbeng by http://ejournal.polbeng.ac.id/index.php/IP is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License