RANCANG BANGUN DAN ANALISA MATA PISAU PADA MESIN PENGHALUS KOTORAN KAMBING KAPASITAS 50KG/JAM

Salomo Maruli tua Nainggolan(1*)

(1) POLITEKNIK NEGERI BENGKALIS
(*) Corresponding Author

Abstract


Goat dung smoothing machine, the manufacture of this tool serves to facilitate farmers in smoothing goat dung, after observing the next stage is planning, namely covering. Planning drawings, calculations to determine the components that will be used. The final stage is the manufacturing or assembly process. With the goat dung smoothing tool for farmers which is designed with a capacity of 50 kg/hour, where this tool has 4 straight blades and the blade used is a steel bar chainsaw, then the blade hardness test is carried out using the Rockwell method with a ratio of raw material and header to determine the hardness value with length x width x thickness 450 x 50 x 4.5 mm. It is hoped that it will be able to smooth out goat dung quickly. And from the results of the tests carried out, the maximum results were obtained, namely at a speed of 2800 Rpm with a time of 27 minutes where the results were very satisfying, namely the form of smooth results.

 

Keywords: Goat dung, Blade blade, Smoothing goat dung,


Article metrics

Abstract views : 282 | views : 34

Full Text:

Hal 11-17

References


Tri Dimas, dkk. “Rancang Bangun Mesin penggiling Kotoran Kambing”. Skripsi, ITS, Surabaya. 2017.

Setiawan, Hera. "Pengaruh Proses Heat Treatment Pada Kekerasan Material Special K (K100)." Simetris: Jurnal Teknik Mesin, Elektro dan Ilmu Komputer 2.1 (2012): 37-47.

A. E. Latief, N. D. Anggraeni and A. Sulaeman, "Perancangan Poros dan Mata Pisau Mesin Pencacah Plastik," in Seminar Nasional Tahunan Teknik Mesin ke-15, Bandung, 2016.

Hamarung, M. A., Jasman, J., & Akmal, H. Rancang Bangun Mesin Pecacah Rumput Untuk Kompos Dengan 2 Saluran Masuk, 1 Saluran Keluar, Dan Pisau Pengarah. In Seminar Nasional Hasil Penelitian & Pengabdian Kepada Masyarakat (SNP2M) (pp. 44-49). (2019, December).

Ferdian, M. Perancangan dan Analisis Pisau Penghancur pada Mesin Penghancur Limbah Kaca. Jurnal Teknik Mesin, 18(1), 1. (2022).

Pujono, P., Pribadi, J. S., Firmansyah, A., & Kurniawan, I. RANCANG BANGUN PISAU PEMOTONG JERAMI PADA MESIN PENGHANCUR JERAMI PADI. Bangun Rekaprima: Majalah Ilmiah Pengembangan Rekayasa, Sosial dan Humaniora, 7(2, Oktober), 1-14. (2021).

Ardiansyah, A. Rancang bangun mesin penggiling kotoran kambing. SKRIPSI Mahasiswa UM. (2021).

Nadliroh, K. Rancang Bangun Mesin Penggiling Kotoran Kambing dengan Sudu Berbentuk Martil. Jurnal Mesin Nusantara, 2(1), 18-26. (2019).




DOI: https://doi.org/10.35314/ism.v3i1.2911

DOI (Hal 11-17): https://doi.org/10.35314/ism.v3i1.2911.g1351

Refbacks

  • There are currently no refbacks.