Rancang Bangun dan Analisa Poros Mesin Roasting Kopi Dengan Prinsip Kerja Rotary

Imam Sutadi(1*), Razali Razali(2)

(1) Politeknik Negeri Bengkalis
(2) Politeknik Negeri Bengkalis
(*) Corresponding Author

Abstract


Liberika coffee is coffee that is cultivated in the lowlands which only has a height of about two meters above sea level. Liberika coffee that lives in the lowlands of Rangsang Pesisir, Meranti Islands Regency, is one of the typical icons of Meranti, so as not to lose the taste of Liberika Meranti coffee. The author wants to design and build a coffee roasting machine to make it easier to determine Light, Medium, Dark roasts so that coffee quality is maintained and the price is more affordable for a coffee roasting machine. From the provisions in coffee roasting according to the criteria, it can be concluded that roasting using a coffee roasting machine with a rotary working principle of an initial temperature of 180℃ can produce a light roast in 3 roasting experiments, the average value of which is Light Roast at a temperature of 162.5 . Medium Roast 164.4 . Dark Roast 168.1 . For rotary shaft analysis, coffee roasting machines get the feasibility results from the moment given during installation using Autodesk Inventor 2019 analysis for the shaft to get a load of 100,000 N/mm in the Von Mises category 0.479368 MPa, 1st principal stress 0.35322 MPa, 3rd principal stress 0.0449345 MPa, Displacement 0.00601512 mm, Safety Factor 15 ul.

Article metrics

Abstract views : 239 | views : 22

Full Text:

7-12

References


Kurniawan, W. D., & Sutiadiningsih, A. (2018). Penerapan Mesin Penyangrai Kopi Semi Otomatis untuk Meningkatkan Kualitas Produksi pada UKM Kedaikopi. Prosiding Semnas PPM 2018, 1(1), 1847-1852.

Novison, R. (2021). Aplikasi Metode Taguchi untuk mengetahui Kualitas Kopi Sangrai Liberika berdasarkan Parameter Peyangraian: Taguchi. Jurnal Elektro dan Mesin Terapan, 7(2), 89-101. Jurnal.pcr.ac.id/index.php/elementer 7(2): 89–100.

Palippui, H., & Ramadhan, S. (2020). Analisa Kekuatan Struktur Barge Pada Proses Load Out Offshore Module (Top Side) dengan SPMT. Zona Laut: Jurnal Inovasi Sains Dan Teknologi Kelautan, 1-5.

Purnama, P. Z., Budiharti, N., & Priyasmanu, T. (2020). Rancang Bangun Mesin Oven Kopi Dengan Prinsip QFD Dan Ergonomi. Jurnal Valtech, 3(2), 25-31.

Taufiq, M., & Indra, A. (2020). Rancang Bangun Alat Penggiling Terasi dengan Variasi Diameter Lubang Pengeluaran. INOVTEK-SERI MESIN, 1(1).

Tiaraputri, A. (2021). Arti Penting Pendaftaran Kopi Liberika Kabupaten Kepulauan Meranti Riau Dalam Kekayaan Intelektual Komunal. Jurnal Gagasan Hukum, 3(02), 172-187.

Toteles, A. (2021). Analisis Material Kontruksi Chasis Mobil Listrik Laksamana V2 Menggunakan Software Autodesk Inventor. Machine: Jurnal Teknik Mesin, 7(1), 30-37.

Yoga, S. W. Y., Imamuddin, A. M., Anshori, M. A., & Koesmarijanto, K. (2021). Pengaruh Roasting Kopi Dampit Terhadap Nilai Permeativitas Relatif Kopi Dampit. Jurnal Jaringan Telekomunikasi, 11(4), 182-187.




DOI: https://doi.org/10.35314/ism.v2i2.2661

DOI (7-12): https://doi.org/10.35314/ism.v2i2.2661.g1246

Refbacks

  • There are currently no refbacks.